Browse all practice questions for the Reconnaissance, Selection, and Occupation of Position (RSOP) Table 4 Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Reconnaissance, Selection, and Occupation of Position (RSOP) Table 4 Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which planning factor is directly affected by weather conditions?
  • Which form would you use to document Patriot Launcher Location and Alignment Data (un-surveyed)?
  • Which statement best describes the purpose of route reconnaissance?
  • Under tactical conditions, inter-personnel spacing should be approximately how many meters?
  • How should communications be considered when selecting a position?
  • The RSOP NCOIC is responsible for supervising which teams on site?
  • Which point serves as the dismount location for FP element arrivals?
  • Which form documents Patriot Radar Location and Alignment Data?
  • What is the maximum ISLB points you can put on a DA 7616 form?
  • What does PTL stand for?
  • How far behind does a soldier follow a minesweeper?
  • How many launchers does the down-range section contain?
  • Which tactic best reduces exposure when moving to a position under cover of darkness?
  • Which factor would most likely indicate potential for surprise in RSOP assessment?
  • DA Form 7619 documents Patriot Launcher Location and Alignment Data (surveyed).
  • Where is the ammo stored?
  • How many days worth of rations should an RSOP team bring with them?
  • Which statement is true regarding site layout briefing?
  • How often should RSOP crew members take the Table 4?
  • CBRN domains refer to threats in which areas?
  • SSS stands for?
  • What is the minimum area size for radar emplacement?
  • What unit is used to express the back-blast area measurement?
  • Concealment in RSOP is used primarily to reduce detectability by the enemy and maintain operational surprise.
  • In RSOP, what is the purpose of conducting a reconnaissance of the route?
  • What Rank can an RSOP OIC be?
  • Which element is not typically included in a position sketch?
  • The fuel tanker is placed near the primary entrance to serve what purpose?
  • In RSOP, what is the primary criterion for choosing a route to the position?
  • Which description best fits the meaning of partial mission capability?
  • Who determines the PTL?
  • What is the significance of mine and obstacle awareness in RSOP?
  • What role do maps and overlays play in RSOP?
  • What is the importance of redundancy in security measures?
  • Which form documents Patriot Launcher Location and Alignment Data (surveyed)?
  • What is the primary objective of reconnaissance in RSOP?
  • What is the purpose of 'occupying' a position?
  • Which statement best describes CBRN in a security context?
  • Local launchers are placed in which formation?
  • What is the purpose of an occupancy checklist?
  • What is the purpose of an overlay or map?
  • True/False: RSOP NCOIC briefs the operation order to the RSOP team and verifies all equipment and supplies are loaded IAW the load plan.
  • Terrain feature analysis helps RSOP planners by identifying which factors?
  • If a team member is decertified on their Table IV but neither the RSOP OIC nor NCOIC are lost, what is the status of RSOP certification?
  • What two forms are used for PMCS?
  • Which statement best describes RL-1 and RL-3 placement capabilities?
  • Which describes the end state of RSOP when occupation is complete?
  • What is the maximum cross roll for the Antenna Mast Group (AMG)?
  • The fire control equipment soldiers set up the five items. Which list is correct?
  • Where can the RSOP checklist be found?
  • Under RSOP, decertification occurs when which of the following events occur?
  • What are the three methods of recon used for RSOP?
  • What is the SSS used for?
  • Who is first in order of movement when approaching a site?
  • What is meant by 'sectors of fire' in RSOP?
  • Which pair defines the RS-LS spacing constraints for local launchers?
  • At a minimum, how deep must the ground rods be driven?
  • When selecting a position, what communication requirement is essential?
  • How should a reconnaissance report be structured?
  • Recon considerations must include which items?
  • What does MWO stand for?
  • Which RSOP phase comes first?
  • What elements are commonly included when describing contingency planning for RSOP?
  • When selecting a position, which factors should be considered regarding water sources?
  • Who is responsible for verifying that equipment and supplies are loaded IAW the load plan?
  • What is the minimum distance required for ISLB data?
  • Which manual covers Battery RSOP?
  • What should be included in the occupancy order?
  • In RSOP water planning, which detail is considered regarding water access?
  • Who will determine all clear or a lower MOPP level?
  • What does CBRN stand for?
  • Which statement accurately reflects RSOP decertification criteria?
  • In RSOP SOPs, movements and occupations must cover which of the following?
  • DA Form 7618 documents Patriot Launcher Location and Alignment Data (un-surveyed).
  • DA Form 7617 covers which data?
  • What is the max length a ground rod will extend from the ground?
  • What is the maximum distance required for ISLB data?
  • At minimum, how many RSOP personnel must be CLS certified?
  • True/False: RSOP NCOIC "ensures" that all equipment is present IAW load plans, all RSOP vehicles are mission capable, and all team personnel are present.
  • Who is responsible for briefing the 1SG and PSGs on site layout, tactical situation, and unusual circumstances?
  • What distance consideration is key when assessing proximity to support elements?
  • Which crew drill covers RSOP?
  • True or False: All key personnel have to be able to perform reconnaissance, selection, occupation, and movement tasks.
  • Which publication contains the RSOP checklist?
  • Which two positions are required on the minimum RSOP Team?
  • Which statement best describes the RSOP OIC's action regarding ISLB data after ECS arrival?
  • Which RSOP phase involves emplacement?
  • When evaluating cross-fire with adjacent units, which practice is essential?
  • Which RSOP team member is responsible for determining the ISLBs, PTL and STL and the site of radar?
  • Assuming there are three RSOP personnel on site, how many must be CLS certified at minimum?
  • What meter interval should there be between personnel under tactical conditions?
  • In RSOP, redundant cover refers to which concept?
  • Which statement best reflects how weather affects RSOP planning?
  • What is the purpose of supporting fire in RSOP?
  • What is the recommended number of RSOP personnel (not required)?
  • What does the up-range section consist of?
  • Select a correct expansion for CBRN from the options below.
  • Which group is first in order of movement when approaching a site?
  • In RSOP, what role do 'sectors of fire' play?
  • What role does time of day play in RSOP?
  • What is the maximum allowable slope for the radar emplacement area?
  • Which elements would you expect to see summarized in the reconnaissance report's findings?
  • DA Form 7616 relates to which Patriot data?
  • Which roles make up the up-range section?
  • What is the purpose of reconnaissance notes?
  • Which of the following best describes the purpose of occupying a defensive position?
  • What is the purpose of a position maintenance plan in RSOP?
  • The down-range section consists of which personnel?
  • The primary authority for determining the PTL is:
  • Which type of reconnaissance is described as the most accurate and reliable?
  • What does ISLB stand for?
  • Why is security a key criterion when selecting a position?
  • What is the required area for a Patriot Fire Platoon?
  • While shooting ISLB data, within what distance of the RS UTM should elevations of prominent terrain features be recorded?
  • What information should a position sketch include?
  • What is the role of camouflage in RSOP?
  • Which factor is essential when determining a position's field of fire?
  • Warnings in the Patriot technical manuals are used to prevent what?
  • Which of the following statements correctly describes the RSOP team's minimum personnel requirement?
  • What is the minimum RS-LS distance?
  • What documents are typically produced during RSOP?
  • Where should latrines be located in relation to the water supply?
  • Who does the RSOP OIC give the ISLB data to and when?
  • The down-range section lies in two launchers on either side of the ___.
  • Who possesses overall responsibility for the RSOP mission, personnel, and equipment?
  • An RSOP team should recon two different routes; what are they?
  • OSLB stands for?
  • If the RSOP OIC is lost but no team member is decertified on Table IV, what is the status of RSOP certification?
  • What is a key security measure after occupying a position?
  • What is meant by 'fire discipline' in RSOP?
  • How do you determine a position's field of fire coverage?
  • Latrines must be located downwind from the water supply by how many yards?
  • What is the maximum roll for the Antenna Mast Group (AMG)?
  • Which manual covers battalion/HHB RSOP?
  • What is the distance range for Remote Launcher 3 to counter threats?
  • Who briefs the commander and FP PL about site layout and additional circumstances?
  • What is the distance from the radar to the rear area down-range?
  • In the RSOP emplacement sequence, which asset is prioritized for initial emplacement?
  • What is the minimum number of personnel for an RSOP team?
  • To maximize mutual support and minimize gaps, how should adjacent sectors of fire be managed?
  • Emplacement of RL-3 launchers must be within how many degrees of the PTL/STL?
  • In RSOP terminology, partially mission capable is denoted with which symbol?
  • The SSS provides which data types for manual emplacement?
  • How does RSOP address observation posts?
  • Where is the maintenance area located?
  • Elevations of prominent terrain features should be recorded within what distance of the RS UTM during ISLB data collection?
  • What criteria are used to judge a position's suitability?
  • What best describes the end state of RSOP after occupation?
  • What is the first thing established by the RSOP team at a site?
  • What is the minimum requirement for an RSOP Team?
  • Which role is primarily responsible for planning and executing the RSOP mission, including personnel and equipment readiness?
  • Which is an example of a non-physical factor in RSOP assessment?
  • What is the primary reason for isolating a position from enemy observation during RSOP?
  • What is the minimum distance between launchers?
  • How many ISLB points can you put on a DA 7616 form? (Minimum)
  • What is meant by 'redundant cover' in a position?
  • What is the dismount point for equipment on site?
  • Which statement best describes a requirement for observation posts under RSOP?
  • Which item is included in the occupation plan?
  • RSOP decertification requires which statement best describes the criteria?
  • What is the difference between reconnaissance of terrain and reconnaissance of routes?
  • What is the purpose of a rehearsal in the RSOP process?
  • How can terrain feature analysis influence ROA (rates of advance) decisions in RSOP?
  • What constitutes a suitable approach route to the position?
  • What are the 3 types of north?
  • How should you handle last-minute changes during RSOP?
  • The SSS data is used to facilitate which of the following?
  • What is a typical feature of a well-occupied position?
  • How far should the mess area be from the latrines?
  • Which four elements form the fire control platoon?
  • What is the first step in preparing the RSOP team for their mission?
  • How does terrain slope affect position selection?
  • What is typically included in the occupation plan?
  • What is the role of observation in RSOP?
  • What is the maximum threat-countering distance for Remote Launcher 3?
  • What is the hazard distance for the Radar System?
  • What is the primary mission of the RSOP team?
  • How does time pressure influence RSOP decisions?
  • What is the distance range for Remote Launcher 1 to counter threats?
  • What does AMG stand for?
  • The proper ground rod location is no more than ___ feet from the equipment.
  • Which of the following ranks would be the minimum for an RSOP OIC?
  • What is the maximum RS-LS distance for a local launcher?
  • How do you acquire the ISLB?
  • What best summarizes the RSOP end-state when occupying a position?
  • What are the four phases of RSOP?
  • What is a common error in RSOP position selection?
  • How should a route to the position be planned in RSOP?
  • RL1/RL3 are used for intercepting what?
  • True/False: The planning phase must include a briefing on the new mission, enemy and friendly situations, and proposed location to the RSOP OIC.
  • Which option lists the exact five items the fire control equipment soldiers set up?
  • How are contingencies captured in an RSOP plan?
  • Who supervises the fire control, launcher, and security teams on site?
  • Why is concealment important in RSOP?
  • How many entrances and exits does the site need to have?
  • Which of the following best describes the distance between the radar and the rear area down-range?
  • What is the first piece of equipment to be emplaced in the RSOP sequence?
  • How many soldiers are in the ECP section?
  • Do mine sweepers carry their weapons while sweeping?
  • A ___ denotes a deadline deficiency.
  • What measures are used to mitigate exposure when moving to a position at night?
  • Which factor is considered during terrain analysis for RSOP?
  • Which item is NOT typically included in the occupation plan?
  • What is the back-blast area of a PATRIOT Launcher?
  • What is a 'kill zone' in the RSOP context?
  • What does observing approach routes help achieve?
  • What is an example of poor position choice?
  • What is the distance range for the Local launcher to counter threats?
  • Which is established first by the RSOP team at a site?
  • The ammo storage is protected by which features?
  • DA Form 7620 covers Patriot Launcher Supplemental Roll and Cross roll.
  • Which item is included in recon considerations besides route?
  • RL-1 launchers are located up to how many kilometers in front of the radar?
  • What are remote Launchers RL 1/RL 3 used for?
  • What is the importance of pace counting during reconnaissance?
  • Where is the fuel tanker located?
  • Which location serves as the dismount point for the arrival of FP elements?
  • If a system is designated as partially mission capable, which statement most closely aligns with RSOP terminology?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy